Manually create connection
To set up a cellular connection manually, tap
, and
select
Settings
>
Control panel
. In
Control panel
, select
Connectivity
>
Connections
>
New
. The connection setup
wizard opens. Select
Next
to proceed.
1.
In
Connection setup: Name and type
, define the
following settings:
Connection name
—Enter a descriptive name for
the connection.
Internet con
n
ec
tions
23
Connection type:
—Select the type of the network over
which you want to access the Internet.
To use a packet-switched data service in a cellular
network, such as GPRS (network service), select
GPRS
.
To use a circuit-switched data service in a cellular
network, such as HSCSD (high-speed circuit-switched
data; network service), select
Data call
.
Select
Next
to proceed.
2.
Your device detects the cellular network type of your
phone automatically when you pair the phone with your
device. However, if you have not paired a mobile phone
with your device, in
Select celular network type
, select
the type of network over which the Internet connection
takes place, and select
Next
to proceed.
3.
In the connection setup dialog, define the
following settings:
Access point name
—Enter the name of the Internet
access point. Obtain the name from your Internet service
provider. This setting is only shown if you selected
packet-switched data connection (such as GPRS)
and your phone uses a GSM cellular network.
Dial-up number
—Enter the modem telephone number
of the Internet access point.
User name
—Enter a user name, if required. The user
name is usually provided by the Internet service provider.
Password
—Enter a password, if required. The password
is usually provided by the Internet service provider.
Prompt password at every login
—Select this option if
you want to enter your password every time you log on
to an Internet server, or if you do not want to save your
password in the device.
Tip: It is common in GPRS packet data networks
that the access point name is Internet or it is
left blank, the dial-up number is *99#, and the
user name and password may be left blank. For
CDMA packet data network settings, contact
your service provider.
4.
In
Connection setup: Complete
, select
Finish
to save
the settings, or
Advanced
to define advanced settings.
For more information, see the device help.